1.Multi Busbar Technology
Better light trapping and current collection to improve, effectively improve the module’s power reliability.
2.Higher output power
Module output power increased to 10%.
3.Low light performance
The special solar cell technology has excellent low light power generation.
4.Better resistance to hot pots
The use of half cell structure and special circuit design is less shade loss, with better temperature coefficient and thermal spot resistance ability.
5.Adaptability to harsh environments
High performance material are suitable for coastal, farm, desert and other harsh environmental conditions, glass surface is anti-reflective and easy to clean, minimizing power generation losses caused by dirt and dust.
The solar panel mono perc half cut, also known as half cells solar panel, is a special type of solar panel that is divided in half so that the top runs independently of the bottom, generating more energy even if one part is shaded. The half cells solar panel 550w is one of the typical examples. The engineer applies the half-cut solar cell technology to the solar panel. Half-cut solar cell technology boosts the energy production of solar panels by lowering cell size, allowing more cells to fit on the panel.
In current market, why more and more people prefer half cells solar module for projects?
1.The half cell takes into account the utilization rate of support and land, and at the sale time reduces the loss of power generation caused by shading. Conventional solar panel are usually two ways installation: vertical and horizontal arrangement. With its special parallel-series structure, the half cells modules can be arranged longitudinally to improve the utilization of brackets and land. Meanwhile, reduce the loss power by shadow shading.
2.The operating temperature is lowered, and the probability of hot spots is reduced. Due to the reduced internal current and losses, the operating temperature of the components and the junction box is reduced, and the probability of hot spots and the risk of damage to the entire components is also greatly reduced. In the outdoor working state of the module, the temperature of the half cells module itself is about 1.6℃ lower than that of the conventional whole cell module. Resistive loss is reduced by 75% and power is increased 5~10w.
GR is the great and reliable supplier of solar system and has earnt the reputation in solar modules southeast asia. With a solid foundation built on knowledge and experience, GR is well-equipped to offer cutting-edge solar solutions. Whether you're looking to power your home, business, or an entire community, GR has the expertise to tailor solutions that meet your unique energy needs. Moreover, we deeply understand the importance of the durability of the solar system. Therefore, the solar modules southeast asia produced by GR have passed many certifications such as CE, IEC, ISO9001, ISO9008, and ISO14001.
> High efficiency 5BB PV cell
> Uniform color
> Anti-PID
> Germany standard Cell
> Full test
>Toughened glass> Translucency of normal luminance is increased 2%
> Module efficiency is increased 2%
> Self-clean function
> Service life 25 years
>Conventional standalone edition and engineering custom edition
> Quality diode ensures module running safety
> IP67 protection level
> Heat dissipation
> Long service life
> Stock-size
> Silvery and black
> Thickness 30/35/40/45/50mm
> Stress test.r
>Multi busbar design increase the aspect ratio
> Improve the ability to collect current
> Improve the efficiency of the cell
| Product name | 540W Mono Solar Module | |||
| Power | 540W | |||
| Size | 2279*1134*35mm | |||
| Cells number | 60pc(6*10) | |||
| Solar cell | Mono 182*182mm | |||
| Front glass | 3.2mm toughened glass | |||
| Frame | Aluminum Alloy | |||
| Weight | 28.5kgs | |||
| Maximum power voltage | 41.62V | |||
| Maximum power current | 12.98A | |||
| Open circuit voltage | 49.55V | |||
| Short circuit current | 13.89A | |||
| Junction box | IP67, 3*bypass diodes | |||
| Cable | 1000mm length, 4mm² with MC4 | |||
| System voltage | DC 1000V/1500V | |||
| Operational Temperature | -40°C to +85°C | |||
| Mechanical Load | 5400Pa | |||
| Wind Load | 2400Pa | |||
| Package | 31pcs/pallet | |||
| 40HQ Container | 620PCS | |||
Characteriestics(STC)
On grid&off grid solar system
Residential roof system
Car charging station
Water pump solar system
You also may wonder where to buy the reliable camping light in southeast Asia. GR is an excellent exporter of camping lights in southeast Asia. Established in 2019, GR has an excellent and professional engineering team and an independent production line. GR is able to provides clients with the excellent one-stop rocurement services.
GR’s camping lights are versatile and specially engineered for outdoor uses, so GR’s camping lights are perfectly fit for outdoor activities needs. Furthermore, all the camping lights in GR are certificated with the CE, IEC, ISO9001, ISO9008, and ISO14001.
Scroll down to have a view about camping lights southeast asia.
After-sales Service
5 years manufacture warranty and 25 years power warranty.
FAQ
Q1: How to choose the right Panel?
A1: Tell us your demand, then our sales will recommend a suitable panel for you.
Q2: What's the difference between Mono and Poly panel?
A2: Monocrystalline solar panels have the highest efficiency rates since they are made out of the highest-grade silicon. The process used to make polycrystalline silicon is simpler and costs less. The amount of waste silicon is less compared to monocrystalline.
Q3: How about the delivery time?
A3: 7 days for sample; 15 days for bulk order.
Q4: How to get samples ?
A4: We provide free sample for most of products, and you just need to arrange the delivery things.
Q5: What is the warranty for solar panels?
A5: 5 years warranty on GR-Solar product, 10 year optional, while the life time is 30 years ,
Q6: How to solve the technical problem?
A6: 24 hours after-service consultancy just for you and to make your problem to solve easily.
Q7: Are you factory ?
A7: We are manufacturer in solar products area more than 10 years .
